Table of Contents
Advertisement
Call Forward
Call Forward lets you redirect incoming calls to an alternate number. ALWAYS
redirects all incoming calls regardless of the state of your telephone. B-INT
redirects internal calls when your telephone is busy, and B-EXT redirects
external calls when your telephone is busy. NA-INT redirects internal calls after
several rings if you don't answer, and NA-EXT redirects external calls after
several rings if you don't answer.
Note: For information about "I AM HERE", see Call Forward – Remote
To program Call Forward:
1.
Press SUPERKEY
2.
Press # until "Call Forwarding?" appears
3.
Press * for Yes
4.
Press # until the type of Call Forward that you want to set up appears (see
above note).
5.
Press * for Review
6.
If a number is already programmed, press * for change
7.
Press * to Program
8.
Dial the destination number
9.
Press
to Save
10.
Continue programming other types of Call Forward
–OR-
Press SUPERKEY to leave the programming mode
To turn Call Forward on and off (once it has been programmed)
1.
Press SUPERKEY
2.
Press # until "Call Forwarding?" appears
3.
Press * for Yes
4.
Do one of the following:
To turn Call Forward ALWAYS on or off, press * for Review, press * for
Change and then press # to turn on or off
To turn another type of Call Forward on or off, press # until you reach
the desired display. Press * for Review, press * for Change and then
press # to turn on or off.
5.
Continue turning other types of Call Forward on or off
–OR-
Press SUPERKEY to leave the programming mode
MITEL Networks 5207 IP Phone
User's Guide
11
Rev. 012805
Advertisement
Table of Contents
