Table of Contents
Advertisement
Telephone settings
LOCL AREA CODE?
LAC 1-_ _ _
SET TIME/DATE
12:00
AM
blinking
Menu setup
2.
Use the dial pad keys to enter three digits
of the first local area code in LAC 1. Press
REMOVE to erase digits. Press SELECT
repeatedly to advance to the next local area
code (LAC 2, LAC 3 or LAC 4).
Press SELECT to save your setting and move
3.
to the next option when you have finished
entering local area codes.
NOTE: If you do not need to program the local
area codes, press FLASH to exit. Then follow the
instructions in Set features on page 14 to set
other features.
Set date and time
When the telephone is idle, the screen shows the
date and time. The time can be set manually or by
incoming caller ID information (see How caller ID
works on page 33).
Press MENU, the screen displays SET TIME/DATE
1.
and USE # FOR AM/PM alternatively.
2.
Use the dial pad keys (0 through 9) to set the
blinking digits. Use
11-20
the previous or next digit.
For example, to enter the month of March, you
can enter 03 or 3.
3.
Use # to select between AM and PM.
4.
When the correct time and date (month-day)
are shown, press SELECT to save the new
setting and move to the next option.
/
DIR
17
or
/
to move to
CID
Hide quick links:
Advertisement
Table of Contents
