Reviewing And Dialing A Two-Touch Number - AT&T CL2939 User Manual

Two-touch memory
blinking
REVIEW
ENTER LOCATION?
8887227702
8887227702
8887227702
12:00
AM
Reviewing and dialing a two-touch
number
To review a two-touch number
Use the following steps to view a telephone
STORE
number stored in a two-touch memory location.
When the telephone is idle, press MEM.
1.
2. Press
3. Press SELECT, the screen shows
ENTER LOCATION?
Press a dial pad key (0 through 9) to choose the
4.
desired two-touch memory location. The screen
shows the telephone number stored in that
memory location.
5. Press FLASH to return to idle mode.
NOTES:
• If there is no number in the two-touch location
you selected, the screen shows NO NUMBER.
• The screen can show up to 12 digits in the
second row. So, if the number is longer than
12 digits, the screen shows the first 12 digits
and then scrolls to the following digits of the
number.
To dial a two-touch number
Use the following steps to dial a desired telephone
number stored in a two-touch memory location.
1. Refer to steps 1 through 4 in To review a
two-touch number on this page to show
the telephone number stored in the desired
memory location.
Press DISPLAY DIAL. The telephone
2.
automatically turns on the speakerphone and
11-20
then dials the displayed telephone number.
-OR-
Press DISPLAY DIAL and then lift the handset.
The telephone dials the number automatically.
/ or / until REVIEW is blinking.
DIR CID
24