Directory Storage - AT&T CL2939 User Manual

Directory
REVIEW
ENTER NUMBER
8003604121_
ENTER NAME
8003604121
ROBERT BROWN
8003604121
STORED
ENTER NUMBER
_

Directory storage

Use the following steps to store a name and
blinking
telephone number in the directory.
1. When the telephone is idle, press DIR/
enter the directory.
STORE
2. Press
3. Press SELECT, the screen shows ENTER NUMBER.
4. Use the dial pad keys to enter the telephone
number (up to 24 digits).
•
•
•
•
•
5. Press SELECT. The screen shows ENTER NAME.
Use the dial pad keys and Character chart on
6.
page 26 to enter the letters, digits or symbols
(up to 15 characters). Press the key repeatedly
until the desired character shows on the screen.
•
•
7. Press SELECT to save the entry. The screen
shows STORED and then ENTER NUMBER.
/
or
DIR CID
To backspace and erase a digit, press
To insert a space between digits, press
/ . A dash appears on the screen.
CID
To insert a three-second dialing pause, press
/ twice. A P appears on the screen.
CID
To insert a flash signal for using the service
supplied by your telephone service provider,
press FLASH. An F appears on the screen.
To copy the last number dialed (up to 24
digits), press REDIAL.
To backspace and erase a character, press
/ .
DIR
To insert a space, press
28
/ until STORE is blinking.
/ .
CID
to
/ .
DIR