D-Link DAP-1665 User Manual page 41

Section 3 - Configuration
Note: If the Bridge Band is set to 2.4GHz, the settings for the AP's 2.4GHz band will be the same as those for the bridge, so only the Network Name (SSID)
and Visibility of the 2.4GHz band can be changed. However, you can configure all settings for the 5GHz AP, if you check the box to Enable Wireless.
Check the box to Enable the wireless function for the 2.4GHz
Enable Wireless:
band. When the box is unchecked, all wireless functions are
disabled. With wireless enabled, you may set up a specific
schedule. Select a schedule from the drop-down menu or click
Add New to create a new schedule.
Specify a Network Name (SSID) to identify the 2.4GHz network.
Wireless
This is the SSID that wireless clients will search for when
Network Name:
connecting to your wireless network.
When the Bridge Band selected above is 2.4GHz, the contents of
802.11 Mode:
this field will reflect the 802.11 Mode selected above. Selecting
an 802.11 Mode is only possible when Bridge Band is 5GHz:
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of
802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using
a mix of 802.11n, 802.11g, and 802.11b wireless clien
Indicates the channel setting. Do not check the box to Enable
Wireless
Auto Channel Scan if you would like to change the channel
Channel:
to match the channel setting of an existing wireless network.
Check the box to Enable Auto Channel Scan, if you would like
Enable Auto
the DAP-1665 to automatically choose the channel with the
Channel Scan:
least amount of interference.
When the Bridge Band selected above is 2.4GHz, the contents of
Channel Width:
this field will reflect the Channel Width selected above. Selecting
a different Channel Width here is only possible when Bridge Band
is set to 5 GHz.
Select whether you would like the network name (SSID) of your
Visibility Status:
2.4GHz wireless network to be Visible or Invisible. If Invisible
is selected, the SSID of the DAP-1665 will not be shown by Site
Survey utilities. Therefore, the SSID will have to be manually
entered so wireless clients can connect.
D-Link DAP-1665 User Manual
2.4 GHz Band
40