Wireless Client Mode - D-Link DAP-1665 User Manual

Section 3 - Configuration
Wireless Mode: Select Wireless Client from the drop-down menu.
Site Survey: Click Site Survey to display a list of available wireless networks
in your area. To select a wireless network, click the radio button
in the far right column of the scan page. Click Connect at the
bottom of the scan page to confirm the selection. The wireless
network name will automatically appear in the Wireless Network
Name field below.
Wireless Network If you did not use the Site Survey option described above,
Name: enter the Network Name (SSID) of the wireless network that
you wish to connect to. You can also click Site Survey and select
an available Network Name from the list.
802.11 Band: Select 2.4GHz or 5GHz for the wireless band corresponding to
the wireless network that you wish to connect to. You can only
be connected to one wireless band at any time.
Channel Width: Select the Channel Width that you wish to use when connecting
to the wireless network.
Security Select the wireless security mode used by the network you are
Mode: connecting to. For more information regarding wireless security,
please refer to
Wireless MAC Check the box to Enable the cloning of another device's MAC
Clone:
address by the DAP-1665.
Wi-Fi Protected Check the box to Enable the use of Wi-Fi Protected Setup (WPS)
Setup:
for Wireless Client Mode.
Current PIN: Displays the Current PIN which can be used to connect to the
router using the WPS-PIN method.
Click Reset PIN to Default to reset the PIN number to the factory
default settings. Click Generate New PIN to randomly generate
a new PIN for WPS connection. Click Process WPS to begin the
WPS Push-Button setup process.
Click Save Settings to save the current configuration.
D-Link DAP-1665 User Manual

Wireless Client Mode

"Configuring Wireless Security" on page 46.
37