D-Link DAP-1665 User Manual page 32

Section 3 - Configuration
Select Manual configuration to setup your network
manually.
Click Next to continue. The DAP-1665 will scan for
available wireless networks in your area.
You will see a list of available wireless networks. Find the
SSID of the wireless network that you wish to connect to
from the list. Select it by clicking on the corresponding
radio button in the Select column.
Click Connect at the bottom of the page to continue.
If you do not see your network in the list, click Rescan
to search again.
D-Link DAP-1665 User Manual 31