Appendix B Standards; Repairs In Canada; Electromagnetic Interference (Emi); Fcc Part 15 - Hughes Jupiter HT1100 Installation Manual

Safety

Electromagnetic Interference (EMI)

Telecommunications

Repairs in Canada

Electromagnetic interference (EMI)

FCC Part 15

The HT1100 satellite modem has been certified to comply with the standards listed
in Table 6. Additional information follows the table.
Table 6: HT100 standards compliance
Category
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made by
the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
Users should not attempt to make electrical ground connections themselves, but
should contact the appropriate electrical inspection authority, or electrician, as
appropriate.
This product conforms to EMI standards of the U.S. FCC, and Canadian CSA, as
detailed in the following sections. The installation and maintenance procedures in
the installation guide must be followed to ensure compliance with these
regulations.
This is a class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
This section applies to the HT1100 satellite modem. Standards to which conformity
is declared: FCC Part 15
Standards
Standard
UL60950-1 for the USA
CAN/CSA-C22.2 No. 60950-1 for
Canada
FCC Part 15 for the USA
ICES-003 for Canada
TIA IPoS
Appendix B
Appendix B • Standards
1039649-0001 Revision C
75