Activating The Hughesnet Service; Validating Downloaded Files - Hughes Jupiter HT1100 Installation Manual

Activating the HughesNet service

Validating downloaded files

Activating the HughesNet broadband service is the final step in installing the
satellite modem. The customer performs this step, and at the same time accepts
the HughesNet subscriber agreement.
You prepare the customer for activation by connecting the satellite modem to the
customer's computer. You should stay at the installation site until the customer can
connect to the Internet so you can offer guidance and assistance if necessary.
This section gives a broad overview of the activation process. The operating system
of the customer's PC determines the prompting sequence the customer sees.
Before activating service, you should validate that all files downloaded correctly and
that the terminal activation is complete.
1. From the Terminal Activation Successful screen, click the Terminal Installation
tab. Figure 34 shows the Installation is complete.
Figure 34: Complete message screen
2. Navigate to the System Control Center screen.
3. Click the System Status button at the top of the page.
4. The System Status screen appears. Ensure that all downloads are complete as
indicated by the green check marks following the procedures or tasks as
shown in Figure 35.
Chapter 8 • Activating the HughesNet service
1039649-0001 Revision C
Chapter 8
45