Base Settings - Telefunken tx-101 User Manual

Time format
1. In standby mode, press MENU/OK then select Settings.
2. Select Time format.
3. Select date format 12 - Hour or 24 - Hour.
4. Press MENU/OK to save.
Set date and time manually
1. In standby mode, press MENU/OK then select Settings.
2. Select Set date/time.
3. Use the keypad to enter the date according to DD-MM-YY or MM-DD-YY format.
4. Press MENU/OK then use the keypad to enter the time according to 12-Hour or 24-Hour
format.
5. Press MENU/OK to save the settings.
Auto answer
1. In standby mode, press MENU/OK then select Settings.
2. Select Auto answer.
3. Select On or Off.
4. Press MENU/OK to confirm.
Note: As long as you have auto answer set to ON you can answer a call by lifting the handset OFF
the base.
If you have switched auto answer OFF, you will need to press HOME when you lift up the handset.
The default setting of Auto Answer is ON.
Handset reset
1. In standby mode, press MENU/OK then select Settings.
2. Select Reset.
3. Use the keypad to enter 4-digit PIN (default 4-digit PIN is 0000).
4. Confirm by MENU/OK. The display shows Reset to default settings?
5. Press again MENU/OK to confirm.
B. Base settings
Set dial mode
The default dialing mode is suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. In standby mode, press MENU/OK then select Settings.
2. Select Dial mode.
3. Select the dial mode from Tone and Pulse.
4. Press MENU/OK to confirm.
Set the flash time
The default flash time is suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. In standby mode, press MENU/OK then select Settings.
2. Select Flash time.
3. Select the flash time from 80ms, 100 ms, 120 ms, 180 ms, 200 ms 250 ms, 300 ms
and 600 ms.
4. Press MENU/OK to save.
Change system PIN
1. In standby mode, press MENU/OK then select Settings.
2. Select System PIN.
3. Use the keypad to enter old 4-digit PIN (default 4-digit PIN is 0000).
TX Bluetooth Guide 64