Using A Bluetooth Headset; Hold Function - Telefunken tx-101 User Manual

Out of range warning
When the handset goes out of range of the base, the line will hang up if you are on a call. When
you move back within range, the handset will automatically reconnect to the base.
C. Using a Bluetooth headset
You can use a Bluetooth headset on home calls. However, you will need to stay within 30 feet (9
meters) from the telephone base to maintain the Bluetooth signal.
To answer a home call using a Bluetooth headset
Press the call key on your headset.
To end a home call you answered from a Bluetooth headset
Press the call key on your headset.
If you make or answer a home call on a handset, you can transfer the call to your headset. The
handset remains active, but the handset earpiece and microphone are muted. If you hang up the
handset, the call will end.
To transfer a call from a handset to a Bluetooth headset:
Press MENU/OK twice to select Use headset.
To transfer a call from the headset back to the handset:
Press MENU/OK twice to select Use handset.
To end a call that started at the handset:
Press OFF or put the handset in the telephone base or charger.
Note:
If you answer a call using a headset, and you lose the Bluetooth connection or the battery is
depleted, the call will be lost.
If you are using a headset for a call which is transferred from TELEFUNKEN TX 1** handset,
and you lose the Bluetooth connection or the battery of the headset is depleted, the call will be
transferred back to the originating handset.
Earpiece/ handsfree volume
Press UP/DOWN to adjust the listening volume of the earpiece or loudspeaker when during a call.
Note: The handset earpiece volume setting (1-5) and speakerphone volume setting (1-6) are
independent.
When the volume reaches the minimum or maximum setting, you will hear two beeps.
D. Hold function
You can place a home or mobile call on hold.
You will hear an alert tone if you have not taken the call on hold after 14 minutes.
You will hear another alert tone 30 seconds later.
At 15 minutes on hold, the call on hold automatically disconnects.
To place a home call on hold:
Press HOLD. The handset displays Home call on hold and HOME flashes.
To resume a home call on hold:
Press HOME.
TX Bluetooth Guide 57