Pairing And Connecting A Headset - Telefunken tx-101 User Manual

4. If there are already four devices on the paired devices list, the display shows Maximum of
4 devices can be paired and prompts you to replace an existing paired device.
5. The screen displays Please set your mobile phone to search for devices, then press
again MENU/OK.
6. If a device is already connected to the telephone base, the screen displays Connected
device will be temporarily disconnected. Press MENU/OK to temporarily disconnect the
device and continue the pairing process.
7. Press MENU/OK to set the telephone base to discoverable mode.
8. Then, promptly turn on the Bluetooth feature of your mobile phone and search for or add
new devices.
9. Once your mobile phone finds TELEFUNKEN TX 1** , press the appropriate key on your
mobile phone to continue the pairing process.
10. Enter the PIN of the telephone base (the default PIN is 0000) into your mobile phone to
continue the pairing process.
- When a device is successfully connected, the handset displays Paired with mobile
and then Mobile setup completed Device connected.
- When you already have two active devices connected, the handset shows Maximum of
2 devices can be connected. You are prompted to replace an existing device on the
active devices list;
Note: The pairing process may take up to one minute. If the pairing process fails, try again.
The steps for the pairing process may vary for different mobile phones. If this happens, follow the
prompts on your mobile phone and your TELEFUNKEN TX 1** to complete the pairing process.
If you put the handset back in the telephone base or charger while pairing, the process
discontinues and the handset returns to idle mode.
Auto connection
When a device is successfully paired with the telephone base but not connected, the handset
displays
Mobile setup completed Device not connected and then
Auto-connect function enabled Press OK. You can press MENU/OK to exit. You can also
connect a device manually).
D. Pairing and connecting a headset
Before you begin, make sure that your Bluetooth enabled headset is not connected to any other
Bluetooth device. Refer to your headset User's Manual to learn how to search for or add new
Bluetooth devices.
1. In standby time. Press MENU/OK and choose Bluetooth.
2. Select Add headset.
3. Place Bluetooth headset next to base. Press Menu/OK.
4. If there are already four devices on the paired devices list, the screen displays Maximum
of 4 devices can be paired and prompts you to replace an existing paired device
5. Press MENU/OK. The screen displays Please set your headset to discoverable mode,
then press OK.
6. If a device is already connected to the telephone base, the screen displays Connected
device will be temporarily disconnected. Press MENU/OK to temporarily disconnect the
device and continue the pairing process.
7. Set your headset to discoverable mode (refer to the User's Manual of your headset).
8. Press MENU/OK to search for your headset.
9. Once the telephone base finds your headset, press MENU/OK
10. Enter the PIN of your headset (the PIN for most Bluetooth devices is 0000), then press
MENU/OK.
TX Bluetooth Guide 51