Agitator Low Profile; Control Panel - Fisher & Paykel AQUASMART WL37T26CW2 Service Manual

478182

4.14 Agitator Low Profile

The unique low profile agitator works well in both the High Efficiency and Conventional modes. In
the High Efficiency mode, the clothes have greater contact with the agitator due to the low water
level, and the agitator ensures a high level of clothes turnover.
In Conventional mode, the clothes are completely submerged in the water and the curving steep
side walls and raised shoulders of the wash plate vanes create enough inward and upward
movement to keep the clothes turning over even when there is reduced contact with the agitator.
Top View
4.15

Control Panel

The three core components of the control panel on the LCD model are the console, the IMD facia,
and the PCB and housing. A new look that differs from existing machines has been created, so
now capacitive touch buttons drive a high-resolution dot matrix display. The facia provides a sleek
look and no protruding buttons makes it easier to clean.
Console:
The console, which is made from ABS, is the
housing to which the facia and PCB housing
attaches. Lugs at the base of the console
locate into the top deck. The console is secured
to the rear of the top deck by two screws.
IMD Facia – LCD Model
IMD stands for In Mould Decorative display.
Clear plastic is molded over the decorative
polycarbonate silver film. The last process is to
mould the seal on to the facia.
process means a reduction of parts and any
subsequent printing process.
•
No lens.
•
No light pipes.
•
No separate buttons.
•
No separate seal.
The IMD
29
Underside View