Specifying The Setting For "Forward - Konica Minolta FAX2900 User Manual

7

Specifying the Setting for "FORWARD"

1
Select the "RX OPERATION".
H
Refer to "Selecting the "RX OPERATION" menu .
2
Press the [6] key from the 10-Key
Pad to select "FORWARD".
3
Using the [ ] and [
select "ON", "ON(PRINT)" or
"OFF", and then press the [Yes]
key.
H If "ON" or "ON(PRINT)" was
selected, a screen appears, allowing you to specify the forwarding location.
(Continue with step 4.)
H If "OFF" was selected, the "RX OPERATION" menu appears again.
4
Using the one-touch dial keys or
the speed dial numbers, or by
entering the fax number using the
10-Key Pad, specify a fax number,
and then press the [Yes] key.
The "RX OPERATION" menu appears again.
Tip
An e-mail address can be specified as a forwarding location only with FAX3900.
For details, refer to this Chapter 9 "Internet Fax & Network Scan
7-66
] keys,
7.8 Setting Up the Reception
[1]