Day And Time Announcements - AT&T E5934B User Manual

1.
Press TIME/SET
The system will announce the cur-
rent clock setting, then announce
"To begin setting the clock,
press TIME/SET, then press
CHANGE to change the setting
or press TIME/SET to continue."
2.
Press TIME/SET
3.
Press CHANGE
until the system announces the cor-
rect day, then press TIME/SET.
4.
Press CHANGE
until the system announces the cor-
rect hour, then press TIME/SET.
5.
Press CHANGE
until the system announces the cor-
rect minutes, then press TIME/
SET.
6.
Press CHANGE
until the system announces the cor-
rect year, then press TIME/SET.
The system announces the current
clock setting.
Answering system operation
Turning the answering system
on and off

Day and time announcements

To set day and time
Before playing each message, the answering system
announces the day and time the message was received.
Before using the answering system, you should follow
the steps at left to set the day and time, so messages are
dated correctly.
The system uses voice prompts to guide you. Each
time you press
advances by one. When you hear the correct setting,
press
TIME/SET
To check day and time
You can press
day and time without changing it.
NOTES:
1. Press and hold CHANGE to advance the minute or year by increments
of 10 (the year can be set from 2000 to 2039).
2. Caller ID provides the time and date. Set the year so that the day of the
week can be determined by the caller ID information. The time will be set
automatically only if you subscribe to caller ID service provided by your
local telephone company (see page 6).
, the day, hour, minute or year
CHANGE
to move to the next setting.
at any time to hear the current
TIME/SET
29 29