Additional Turn Signals - Mercedes-Benz 2016 Sprinter Operator's Manual

Changing bulbs
88
Bi-Xenon headlamps: turn bulb holder with
X
bulb ; counter-clockwise and remove it.
Halogen headlamps: press the spring
catches of the bulb holder together and
remove the bulb holder with bulb ;.
Pull the bulb out of the bulb holder.
X
Press a new bulb into the bulb holder.
X
Bi-Xenon headlamps: insert the bulb holder
X
with bulb ; into the lamp and turn clockwise.
Halogen headlamps: insert the bulb holder
with bulb ; into the lamp.
The bulb holder with bulb ; engages audibly.
Replace cap : and turn it clockwise to the
X
stop.
The cap audibly engages.
Close the hood (
X
Turn signal lamps
Switch off the lighting system.
X
Open the hood (
X
Turn bulb holder : counter-clockwise and
X
remove it.
Applying light pressure to the bulb, turn it
X
counter-clockwise and remove it from bulb
holder :.
page 219).
Y
page 218).
Y
Press the new bulb into bulb holder : and
X
screw it in clockwise.
Insert bulb holder : into the lamp and turn it
X
clockwise to tighten.
Close the hood.
X
Additional turn signal lamp (all-wheel-
drive vehicles)
Additional turn signals (example: Cargo Van and
Passenger Van)
The additional turn signals are mounted on the
side of the vehicle's front wings.
Switch off the lighting system.
X
Undo screws : and remove lamp lens ;.
X
Applying light pressure to the bulb, turn it
X
counter-clockwise and remove it from the
bulb holder.
Press the new bulb into the bulb holder and
X
screw it in clockwise.
Position lamp lens ; and tighten screws :.
X