Interior Lighting; Rear Interior Light - Mercedes-Benz 2016 Sprinter Operator's Manual

Changing bulbs
92
Remove the bulb from bulb holder ;.
X
Press the new bulb into bulb holder ;.
X
Screw bulb holder ; into courtesy light :.
X
Connect cable connector =.
X
The connector locking spring must engage.
Align courtesy light : on the side and
X
engage.

Interior lighting

General notes
!
Have the bulbs in the overhead control
panel replaced at a qualified specialist work-
shop. You could otherwise damage the over-
head control panel.
Front interior light
Type of lamp: K 18 W
Switch off the interior lighting.
X
Press spring catch ; in the direction of the
X
arrow and lift off interior light :.
Remove bulb = from the bulb holder.
X
Insert new bulb =.
X
Align interior light : on the right-hand side
X
and engage the spring catch.

Rear interior light

Interior light with switch
Interior light with switch
Type of lamp: K 15 W
Switch off the interior lighting.
X
Press in the catch springs of lamp housing :
X
with a suitable object and pry off lamp hous-
ing :.
Press the contact spring of bulb holder ;
X
outwards and remove bulb =.
Insert a new bulb =.
X
Align lamp housing : on the left-hand side
X
and engage.
i
Vehicles with LED lighting: if an LED is
faulty, consult a qualified specialist work-
shop.
Interior light without switch
Interior light without switch
Type of lamp: K 15 W
Switch off the interior lighting.
X
Press in the catch springs of lamp housing :
X
with a suitable object and pry off lamp hous-
ing :.
Open protective cover ?.
X
Press the contact spring of bulb holder ;
X
outwards and remove bulb =.
Insert new bulb =.
X