Menus In The On-Board Computer; Overview - Mercedes-Benz 2016 Sprinter Operator's Manual

On-board computer (vehicles without steering wheel buttons)
If the supply of DEF falls below the reserve range
of 0.8 US gal (3.0 l), the
appears in the display. In addition, the yellow
å DEF indicator lamp lights up in the instru-
ment cluster and three warning tones sound.
In the display, xx corresponds to the number of
possible remaining engine starts
When the display shows that the number of
remaining starts is 0, the
appears in the display and three warning tones
sound.
In addition, the yellow å DEF indicator lamp
and the ; Check Engine indicator lamp light
up in the instrument cluster and three warning
tones sound.
The engine management only allows speeds of
up to 5 mph (8 km/h).
Add at least 1.5 US gal (5.5 l) of DEF
( page 129).
Y
The display message only disappears when the
vehicle is stationary, at the latest after
20 seconds as soon as you switch on the ignition
or start the engine after refueling.
Vehicles with steering wheel buttons
If the supply of DEF is less than 1.5 US gal
(5.5 l), the Check Diesel Exhaust Fluid
see Operator's Manual
the display.
If the supply of DEF falls below the reserve range
of 0.8 US gal (3.0 l), the
message is displayed.
Three short warning tones also sound.
In the display, xx corresponds to the number of
possible remaining engine starts
When the display shows that the number of
remaining starts is 0, the
appears in the display.
The yellow ; Check Engine indicator lamp
also lights up and three short warning tones
sound.
The engine management only allows speeds of
up to 5 mph (8 km/h).
Add at least 1.5 US gal (5.5 l) of DEF
( page 129).
Y
The display message only disappears when the
vehicle is stationary, at the latest after
20 seconds as soon as you switch on the ignition
or start the engine after refueling.
StArtS RExx message
(16 to 0 ).
StArtS IdLE message
message appears in
XX starts remaining
(16 to 0 ).
StArtS IdLE message
On-board computer (vehicles without
steering wheel buttons)
Operating the on-board computer
General notes
The on-board computer is activated as soon as
you turn the key to position 1 in the ignition lock.
The on-board computer shows vehicle informa-
tion and settings in the display.
You can control the display and the settings in
the on-board computer using the adjustment
buttons on the instrument cluster.
Standard display
Odometer
:
Trip odometer
;
Clock
=
? Outside temperature or digital speedometer
A Fuel gage ( page 162)
Y
Selector lever position or current shift range
B
with automatic transmission (
To call up the standard display: turn the key
X
to position 2 in the ignition lock.
Press the 4 menu button for longer than
X
1 second.
The information shown in the display changes
from the outside temperature to the digital
speedometer.

Menus in the on-board computer

Overview

If you wish to exit a menu and go to the standard
display:
Press the 4 menu button for longer than
X
1 second.
or
Do not press any button for 10 seconds.
X
The display accepts the changed settings.
163
page 124)
Y
Z