Cornering Lamps - Mercedes-Benz 2016 Sprinter Operator's Manual

Vehicles with bi-xenon headlamps
Turn-signal: NAK 3457
:
Cornering light function: H7 55W
;
Vehicles with additional turn signals in the
exterior mirrors
Additional turn signal lamp: HPC 16WY
Low-beam headlamps and high-beam
headlamps/cornering lamp
Example (halogen headlamps)
Switch off the lighting system.
X
Open the hood ( page 218).
X
Y
Turn housing cover : in the direction of the
X
arrow and remove it.
Example (halogen headlamps)
Low-beam headlamp bulb holder
;
Bulb holder for high-beam headlamp
=
? Bulb holder for parking lamp/standing lamp
(halogen headlamps)
Turn the corresponding bulb holder with
X
bulb ;, = or ? counter-clockwise and pull
it out of the lamp.
Pull the bulb out of the bulb holder.
X
Insert the new bulb in such a way that its base
X
fits into the recess of the bulb holder.
Insert the bulb holder with the bulb into the
X
lamp and turn it clockwise to tighten.
The bulb holder engages audibly.
Place housing cover : into the opening and
X
turn in the opposite direction of the arrow.
Close the hood.
X
Cornering light function/daytime run-
ning lamps
Switch off the lighting system.
X
Open the hood ( page 218).
X
Y
Turn housing cover : counter-clockwise and
X
remove.
Changing bulbs
Z
87