Maintenance Screen Of Coaxial - Lan Converter - Panasonic WJ-PR204 Operating Instructions Manual

5 Maintenance Screen of coaxial - LAN converter

The maintenance screen can be displayed on the web browser of a PC connected to
the network connector of a coaxial - LAN converter.
Settings such as the following can be performed in the maintenance screen.
– firmware version updates
– Coaxial - LAN converter status confirmation
– IP address changes
IMPORTANT
• To display the setting screen of a camera that is already mounted and connected,
temporarily disconnect the ethernet cable from the camera side unit or the
receiver side units, and directly connect the cable to the setting PC (see
page 44).
• In order to access the coaxial - LAN converter's maintenance screen, you must
temporarily change the IP address assigned to your computer. Before you
change the IP address of your computer, note the IP address and network
settings already assigned to your computer.
• After you have finished using the maintenance screen, restore the computer's IP
address and network settings to their original values.
• If you plan to update the adapter's firmware, download the latest version of the
coaxial - LAN converter's firmware from the Panasonic support site
(http://security.panasonic.com/pss/security/support/) and save it on the
computer before you change the IP address of the computer.
5 Maintenance Screen of coaxial - LAN converter
Operating Instructions 41