Panasonic WJ-PR204 Operating Instructions Manual page 31

1-channel Receiver Side Unit connection example
In this example, the camera is powered by PoE and the receiver side unit is powered
by an AC adaptor.
A
D
Ethernet cable (Cat-5e or higher, straight)
Ethernet cable (Cat-5e or higher, straight)
Coaxial cable
Camera
Camera side unit
Receiver side unit
Switching hub
*1 For information about network cameras recommended by Panasonic, visit our web site.
http://security.panasonic.com/pss/security/support/info.html
*2 Use a PoE camera that consumes no more than 6.5 W.
*3
When connecting a PoE camera or PoE+ camera to an external power supply, make sure to use the included
PoE incompatible cable. When the camera side unit can be installed near the camera, connect the PoE
incompatible cable directly to the camera. When the camera side unit is installed far from the camera, use
the included cable coupler (page 31). When a PoE incompatible cable is used, power is not supplied from
camera side unit to the camera.
Connection example when using the cable coupler
Network connector
Camera
E
C
PoE incompatible cable
(Included parts of camera side unit)
Ethernet cable
F
B
Camera side unit
Cable coupler
(Included parts of camera side unit)
Operating Instructions
4 Connecting the Unit
G
Network connector
31