When Using A 4-Channel Receiver Side Unit - Panasonic WJ-PR204 Operating Instructions Manual

4 Connecting the Unit

4.1.2 When using a 4-channel Receiver Side Unit

IMPORTANT
Use RG-6/U coaxial cable with a loop resistance of 4 /100 m {328 feet} or less.
•
• When a PoE camera is connected to a 4-channel receiver side unit, make sure
the total power consumption is no more than 40 W.
• Only 1 PoE+ camera can be connected.
• When a 4-channel receiver side unit is powered by PoE, use an external power
supply to supply power to the camera.
Receiver
side unit
power
source
AC adaptor
PoE
*1 For information about network cameras recommended by Panasonic, visit our web site.
http://security.panasonic.com/pss/security/support/info.html
*2
When connecting a PoE camera or PoE+ camera to an external power supply, make sure to use the included
PoE incompatible cable. When the camera side unit can be installed near the camera, connect the PoE
incompatible cable directly to the camera. When the camera side unit is installed far from the camera, use
the included cable coupler (page 31). When a PoE incompatible cable is used, power is not supplied from
camera side unit to the camera.
32 Operating Instructions
Camera
Camera side unit
power Ethernet
source cable length
PoE+ Max. 50 m
{164 feet}
PoE Max. 100 m
{328 feet}
External Max. 100 m
power supply {328 feet}
PoE+ Cannot be
connected
PoE Cannot be
*2
connected
External Max. 100 m
power supply {328 feet}
Receiver
side unit
Ethernet
cable length
Max. 100 m
{328 feet}
Max. 100 m
{328 feet}
Max. 100 m
{328 feet}
*3
Cannot be
connected
Cannot be
connected
Max. 5 m
{16 feet
*3
4-27/32 inch
es}
Compatible coaxial cable
length
Max. 200 m {656 feet}:
PoE+ camera
Max. 300 m {984 feet}:
Cameras recommended by
Panasonic
*1
Max. 300 m {984 feet}: PoE
camera
Max. 500 m {1,640 feet}:
Cameras recommended by
Panasonic
*1
Max. 500 m {1,640 feet}
Cannot be connected
Cannot be connected
Max. 500 m {1,640 feet}