Rollator Bracket; Attaching The Rollator - Invacare Leo User Manual

Invacare® Leo
B
C
A
B
1. Locate the mounting bracket A below the seat B on the seat
frame C near the armrest D.
Secure one side of the seat positioning strap E to the mounting
2.
bracket using the bolt F and nut G.
The nut should go towards the center of the scooter.
3. Repeat steps 1-2 on the opposite side of the seat with the
remaining side of the seat positioning strap.

4.2 Rollator bracket

Your scooter can be fitted with an optional rollator bracket. Only
the following rollators, which have been approved by Invacare, can be
transported using this bracket:
•
Dolomite Jazz 600
•
Dolomite Legacy 600
•
Invacare Banjo P452E/3
The maximum permitted rollator weight is 9 kg.
16
E F
CAUTION!
Risk of tipping as a result of altered center of
gravity
The center of gravity of the scooter shifts towards the
back as a result of attaching the rollator. The maximum
safe angle of incline is thereby reduced by up to 2°.
– Note that gradients that you would normally be able
to negotiate may now be too steep and the scooter
could tip. Do not attempt to climb or descend such
gradients.

4.2.1 Attaching the rollator

Dolomite Jazz 600
1506942-P