Sound Effects; Clock And Timers; Others - Panasonic CS-PMX100 Operating Instructions Manual

Sound effects

Changing the sound quality
1
Press [SOUND] repeatedly to select a sound
effect.
2
Press [2, 1] to select the desired setting.
Bass
-4 to +4
Treble
Surround "On Surround" or "Off Surround"
By main unit only
Turn [BASS] or [TREBLE] to adjust the level.
Preset EQ
Press [PRESET EQ] repeatedly to select a setting.
Heavy Adds punch to rock
Soft For background music
Clear Clarifies higher frequencies
Vocal Adds gloss to vocal
Flat Cancels the sound effect
D.BASS
This function lets you enjoy a powerful bass effect.
Press [D.BASS] to select "On D.Bass" or "Off
D.Bass".

Clock and timers

Setting the clock
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select "Clock".
2
Press [3, 4] to set the time and then press [OK].
To check the time
Press [CLOCK/TIMER].
Note:
• Reset the clock regularly to maintain accuracy.
16
Sleep timer
The sleep timer switches off the system after the set
time.
Press [SLEEP] repeatedly to select the setting (in
minutes).
-. -. -.
"30min" "60min" "90min" "120min"
^----------- (----------b
"Off" (Cancel)
To show the remaining time
Press [SLEEP].
Note:
• The sleep timer can be used together with the play timer.
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
Play timer
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1
Press [CLOCK/TIMER] repeatedly to select
"Timer Adjust".
2
Press [3, 4] to set the starting time ("On Time")
and then press [OK].
3
Press [3, 4] to set the finishing time
("Off Time") and then press [OK].
4
Press [3, 4] to select the music source*
then press [OK].
Turning the timer on
1
Prepare the selected music source and set the
desired volume.
2
Press [F, PLAY].
"F" is shown.
To cancel, press [F, PLAY] again.
The system must be switched off for the timer to
operate.
To check the settings
Press [CLOCK/TIMER] repeatedly to select "Timer
Adjust".
(During standby, press [CLOCK/TIMER] twice.)
Note:
• The timer starts at a low volume and increases gradually to
the preset level.
• The timer comes on at the set time every day if the timer is
on.
• If you switch off the system and switch on again while a
timer is in operation, the timer will not stop at the end time.
*1: "CD", "USB", "DAB+" ([PMX100B]), and "FM" can be set
as the music source.
• For timer music source through the port for iPhone/
iPad/iPod and USB devices, select "USB".

Others

Auto off function
As a factory default, this unit will turn to standby mode
automatically if there is no sound and it is not being used
for approximately 20 minutes.
To cancel this function
1
Press [SETUP] repeatedly to select "Auto Off".
2
Press [2, 1] to select "Off" and then press [OK].
Note:
• To turn the function on, select "On" in step 2.
• This setting cannot be selected when radio is the source.
• When connected to a Bluetooth
not work.
• If "Net Standby" is set to "On", this function will also be set
to "On". To change the setting, set "Net Standby" to "Off".
( 17)
and
1
® device, the function does