Table of Contents
Advertisement
Turning the timer on
1
Prepare the selected music source and set the
desired volume.
2
Press [F, PLAY].
"F" is shown.
To cancel, press [F, PLAY] again.
The system must be switched off for the timer to operate.
To check the settings
Press [CLOCK/TIMER] repeatedly to select "TIMER ADJ".
(During standby, press [CLOCK/TIMER] twice.)
Note:
• The timer starts at a low volume and increases gradually to
the preset level.
• The timer comes on at the set time every day if the timer is
on.
• If you switch off the system and switch on again while a
timer is in operation, the timer will not stop at the end time.
*1: "CD", "USB", "DAB+", and "FM" can be set as the music
source.
• For timer music source through the port for iPhone/
iPad/iPod and USB devices, select "USB".
Sound effects
Changing the sound quality
1
Press [SOUND] repeatedly to select a sound
effect.
2
Press [2, 1] to select the desired setting.
BASS
-4 to +4
TREBLE
SURROUND
"ON SURROUND" or
"OFF SURROUND"
By this unit only
Turn [BASS] or [TREBLE] to adjust the level.
Preset EQ
Press [PRESET EQ] repeatedly to select a setting.
HEAVY
Adds punch to rock
SOFT
For background music
CLEAR
Clarifies higher frequencies
VOCAL
Adds gloss to vocal
FLAT
Cancels the sound effect
D.BASS
This function lets you enjoy a powerful bass effect.
Press [D.BASS] to select "ON D.BASS" or "OFF
D.BASS".
Using the auxiliary input
You can connect a VCR, DVD player etc. and listen to
the audio through this system.
Preparation
Connect the external equipment.
1
Press [RADIO, EXT-IN] repeatedly to select
"AUX".
2
Play the external equipment.
Using the PC input
You can play back music on the PC with connected
speakers by connecting a PC to the PC IN terminal on
this unit.
About supported format, refer to "Specifications" ( 14).
Before connecting to a PC
Follow the steps below.
• Refer to the following for the recommended OS
versions for your PC:
– Windows 7, Windows 8, Windows 8.1, Windows 10
– OS X 10.7, 10.8, 10.9, 10.10, 10.11, 10.12
1 Download and install the dedicated driver to the
PC. (Only for Windows OS)
Download and install the driver from the website
below.
http://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
2 Download and install the dedicated app
"Panasonic Audio Player 2" (free of charge) on
your PC. (For Windows OS and OS X)
Download and install the app from the website
below.
http://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
(as of February 2017)
Listening to audio from a PC
1
Disconnect the AC mains lead.
2
Connect this unit and a PC.
This unit (rear)
USB-DAC port
Type B
USB 2.0 cable
(not supplied)
3
Connect the AC mains lead to this unit and turn
this system on.
4
Press [RADIO, EXT-IN] repeatedly to select "PC".
5
Operate the PC for playback.
Note:
• When you play back high-resolution audio, it is
recommended that you use a compatible USB 2.0 High
Speed Cable.
OS X is a trademark of Apple Inc., registered in the U.S. and other
countries.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
PC
USB
Type A
11
Advertisement
Table of Contents
