Panasonic CS-PMX100 Operating Instructions Manual page 11

Connecting a paired Bluetooth
®
1
Press [ ] to select "BLUETOOTH".
"Ready" is indicated on the display.
2
Select "SC-PMX100" from the Bluetooth
device's Bluetooth menu.
®
The name of the connected device is indicated on
the display for a few seconds.
3
Start playback on the Bluetooth
Note:
• If prompted for the passkey, input "0000".
• You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used for the
longest will be replaced.
• This unit can only be connected to one device at a time.
• When "BLUETOOTH" is selected as the source, this unit
will automatically try and connect to the last connected
Bluetooth device. ("Linking" is indicated on the display
®
during this process.)
One-Touch Connection
(Connecting by NFC)
For NFC-compatible Bluetooth devices (Android
®
devices) only
Simply by touching an NFC (Near Field
Communication)-compatible Bluetooth
unit, you can complete all preparations, from registering
a Bluetooth device to establishing a connection.
®
Preparation
• Turn on the NFC feature of the device.
• Android device version lower than 4.1 requires the
installation of the app "Panasonic Music Streaming"
(free of charge).
1 Enter "Panasonic Music Streaming" in the search box of
Google Play to search, and then select "Panasonic
Music Streaming".
2 Start the app "Panasonic Music Streaming" on the
device.
– Follow on-screen instructions on your device.
– Always use the latest version of the app.
1
Press [
device
2
Touch and hold your device on the NFC touch
area of this unit [
Do not move the Bluetooth
®
displays a message or reacts in some way.
Once the Bluetooth
device away from this unit.
• When the registration and connection of the Bluetooth
device is complete, the name of the connected device
device.
®
is indicated on the display for a few seconds.
• The location of the NFC touch area differs depending
on the device. When a connection cannot be
established even if your Bluetooth
the NFC touch area of this unit, change the position of
the device. The condition may also improve if you
download the dedicated app "Panasonic Music
Streaming" and start it up.
3
Start playback on the Bluetooth
Note:
• If you touch another device to this unit, you can update the
Bluetooth
®
will be disconnected automatically.
• When the connection is established, playback may start
automatically depending on the type of device being used.
• The One-Touch Connection may not work properly
depending on the type of device being used.
Bluetooth
device on the
®
You can change the transmission mode to prioritise
transmission quality or sound quality.
Preparation
• Press [
• If a Bluetooth
it.
1
Press [PLAY MENU] repeatedly to select
"Link Mode".
2
Press [2, 1] to select the mode and then press
[OK].
Mode 1: Emphasis on connectivity
Mode 2: Emphasis on sound quality
Note:
• Select "Mode 1" if the sound is interrupted.
• The factory default is "Mode 2".
] to select "BLUETOOTH".
]. ( 5)
device until it beeps,
®
device has reacted, move the
®
device has touched
®
device.
®
connection. The previously connected device
transmission mode
®
] to select "BLUETOOTH".
device is already connected, disconnect
®
Bluetooth input level
®
If the sound input level from the Bluetooth
low, change the input level setting.
Preparation
• Connect a Bluetooth device.
®
1
Press [PLAY MENU] repeatedly to select "Input
Level".
®
2
Press [2, 1] to select the level and then press [OK].
"Level 0" ,. "Level i1" ,. "Level i2"
^---------------------------------------------J
Note:
• Select "Level 0" if the sound is distorted.
• The factory default is "Level 0".
Disconnecting a Bluetooth
1
While a Bluetooth device is connected:
®
Press [PLAY MENU] repeatedly to select
"Disconnect?".
2
Press [2, 1] to select "OK? Yes" and then press
[OK].
Note:
• You can also disconnect the Bluetooth
and holding [ -PAIRING] on the unit.
• The Bluetooth ® device will be disconnected if a different
audio source (e.g., "CD") is selected.
Bluetooth standby
®
When "SC-PMX100" is selected from a paired
Bluetooth ® device's Bluetooth ®
on automatically from standby mode and establish a
Bluetooth connection.
®
1
Press [SETUP] repeatedly to select
"BLUETOOTH Standby".
2
Press [2, 1] to select "On" and then press [OK].
Note:
• To turn the function off, select "Off" in step 2.
• The factory default is "Off". If this function is set to "On", the
standby power consumption will increase.
device is too
®
device
®
device by pressing
®
menu, this unit will turn
11