Using The Auxiliary Input; Using The Pc Input - Panasonic CS-PMX100 Operating Instructions Manual

Viewing available information
You can view information about the DAB broadcast,
programme type, ensemble label, frequency and time.
Press [DISPLAY] to view available information.
DAB settings
1
Press [RADIO MENU] repeatedly to select an
option.
2
Press [2, 1] to select the desired setting and
then press [OK].
DAB Secondary
Primary To listen to primary service.
Secondary To listen to secondary services.
" " is shown.
Auto Clock Adj
On Adjust Start auto clock adjustment.
Off Adjust Cancel auto clock adjustment.
DAB signal quality
When adjusting the antenna, you can check the
reception quality.
1
Press [RADIO MENU] repeatedly to select "Signal
Quality".
2
Press [2, 1] to select frequency.
The current frequency block is displayed and then
the reception quality is indicated.
Reception quality
0 (poor) to 8 (excellent)

Using the auxiliary input

You can connect a VCR, DVD player etc. and listen to
the audio through this system.
Preparation
Connect the external equipment.
1
Press [RADIO, EXT-IN] repeatedly to select
"AUX".
2
Play the external equipment.

Using the PC input

You can play back music on the PC with this system's
speakers by connecting a PC to the PC IN terminal on
the main unit.
About supported format, refer to "Specifications" (
Before connecting to a PC
Follow the steps below.
• Refer to the following for the recommended OS
versions for your PC:
– Windows Vista, Windows 7, Windows 8,
Windows 8.1
– OS X 10.7, 10.8, 10.9, 10.10
1 Download and install the dedicated driver to the
PC. (Only for Windows OS)
Download and install the driver from the website
below.
http://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
2 Download and install the dedicated app
"Panasonic Audio Player" (free of charge) on
your PC. (For Windows OS and OS X)
Download and install the app from the website
below.
http://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
Listening to audio from a PC
1
Disconnect the AC mains lead.
2
Connect the main unit and a PC.
Main unit (rear)
Type B
21).
3
Connect the AC mains lead to the main unit and
turn this system on.
4
Press [RADIO, EXT-IN] repeatedly to select "PC".
5
Operate the PC for playback.
Note:
• When you play back high-resolution audio, it is
recommended that you use a compatible USB 2.0 High
Speed Cable.
(as of March 2015)
PC
USB
Type A
USB 2.0 cable
(not supplied)
15