Advertisement
Available languages
Available languages
_
ARNING: AVOID INJURY. Read and understand
entire Safety section before proceeding.
UNIT ASSEMBLY
Package
Contents:
Unit, Mower Deck and Literature Pack
Unpack
Unit
Remove unit and all other components from shipping
container. Open bypass valves (see MOVING THE UNIT
WITH THE ENGINE OFF on page 15). Push unit from
container onto a level surface. Close bypass valves.
Check Tire Pressure
See SPECIFICATIONS
on page 28.
Position
Steering
Levers
Remove bolts and spacers from steering levers. Flip the
steering levers into operating position. Reinstall spacers,
bolts and nuts. Tighten hardware securely. See Figure 3.
3
1. Steering Lever in
Shipping Position
2. Spacers and Hardware
3. Steering Lever in
Operation Position
Figure 3
OF3520
Connect
Battery
Connect negative (-) battery cable to battery (see Replace
Battery on page 19 and perform steps 2 through 3 in the
installation section).
Check
Engine
Oil
Refer to Engine Manual.
Check
Hydraulic
Oil
See HYDRAULIC FLUID on page 17.
Fill Fuel Tank
See FILLING FUEL TANK on page 14.
Hardware
Check for loose hardware.
Check
Safety
Interlock
System
WARNING: Safety interlock system failure and
improper operation of unit can result in death or
serious injury. Test this system each time unit is
operated. If this system does not function as
described, do not operate until repairs are made.
See Safety Interlock System on page 12.
Check
Blade Level and Blade Pitch
See Leveling the Mower Deck on page 24.
Check
Function
of All Controls
Ensure unit runs and performs properly.
_
ARNING:
FAILURE OF CONTROLS could result
in death or serious injury.
GB- 10
Advertisement
