Oki ES5460 User Manual page 44

FX emulation
ITEM
Character Pitch
Character Set
Symbol Set
Letter 0 Style
Zero Character
Line Pitch
White Page
Skip
CR Function
Line Length
Form Length
TOF Position
Left Margin
Fit To Letter
Text Height
USB menu
ITEM
Soft Reset
Speed
Offline Receive
Serial Number
CHOICE
10 CPI; 12 CPI; 17
CPI; 20 CPI;
PROPORTIONAL
SET 1 / SET 2
IBM 437
DISABLE
ENABLE
NORMAL
SLASHED
6 LPI / 8 LPI
OFF/ON
CR / CR+LF
80 COLUMN / 136
COLUMN
11 inch / 11.7 inch /
12 inch
0.0 inch - 1.0 inch
0.0 inch - 1.0 inch
DISABLE
ENABLE
SAME / DIFF
CHOICE DESCRIPTION
ENABLE Enables or disables the SOFT RESET
DISABLE command.
12 / 480 Mbps Selects the interface speed. After changing
the setting, the machine restarts on exit.
ENABLE
DISABLE
ENABLE Specifies whether to ENABLE or DISABLE a
DISABLE USB serial number.
The USB serial number is used to identify
the USB device connected to your PC.
Configuring your machine.... > 44
DESCRIPTION
Specifies character pitch in this
emulation.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH
with letter o and 9DH with a zero
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Selects whether blank pages are printed
or not.
Selects whether a received carriage
return character (0Dh) also causes a line
feed.
Specifies the number of characters per
line.
Specifies the length of paper.
Specifies the distance of print from the
top edge of the paper.
Specifies the distance of print from the
left hand edge of the paper.
Sets the printing mode that can fit print
data, equivalent to 11 inches (66 lines),
in the LETTER-size printable area.
Sets the height of a character.
SAME: Regardless of CPI, same height.
DIFF: As CPI, character heights vary.