Jumper Settings For Selecting The Cpu's Front Side Bus - DFI-ITOX G4V620-N User Manual

2.4 Jumper Settings for Selecting the CPU's Front
Side Bus
The default setting is Auto. The system will run according to the front
side bus of the CPU installed on the system board.
Important:
• If you are using a CPU whose frequency has been locked
by the manufacturer, overclocking will have no effect.
• Overclocking may result to the CPU's or system's instability
and are not guaranteed to provide better system
performance.
Hardware Installation
3
JP1
2
1
1-2 On: Auto 2-3 On: 100MHz
(default) (forced FSB speed)
2
3
2
1
23