DFI-ITOX G4V620-N User Manual page 13

Wake-On-LAN
This function allows the network to remotely wake up a Soft Power
Down (Soft-Off) PC. Your LAN card must support the remote
wakeup function. Refer to "Wake-On-LAN Connector" in chapter 2
and "Wake Up On LAN" ("Wake-Up Event Setup" field) in the
Power Management Setup section in chapter 3 for more information.
Important:
The 5VSB power source of your power supply must support
≥ 720mA.
Wake-On-Keyboard
This function allows you to use the keyboard to power-on the
system. Refer to "Power On Function" ("Onboard Super I/O Device"
field) in the Integrated Peripherals section in chapter 3 for more
information.
Important:
• The power button will not function once a keyboard
password has been set in the "KB Power On Password"
field. You must type the correct password to power-on the
system. If you forgot the password, power-off the system
and remove the battery. Wait for a few seconds and install
it back before powering-on the system.
• The 5VSB power source of your power supply must
support ≥ 720mA.
Introduction
1
13