2. Insert the cable into the connector at the bottom of the display.
Serial Cable Connector
Figure 7-3. Optional Serial Cable Connector on T erminal
3. Connect the other end of the cable to the serial communications port on your
computer.
Figure 7-4. Connecting Serial Cable to Computer
4. Using the Control Panel, as described in
equivalent application, set the Communications Settings to COM1@115200.
5. Using the Launcher, as described in
application, initiate "PC Link" to connect to the host.
Terminal Display
Serial Port
Appendix B, Demo
Appendix B, Demo
Communications
Program, or an
Program, or an equivalent
7-5