Water Connections - Fitting - Miele CVA610 Technical Information

CVA610 Coffee System
Technical Information
5.49

Water Connections - Fitting

1. Check the Sealing Rings for damage - replace as necessary.
2. Fit the Sealing Rings on the hose.
3. Insert the Hose into the Connector.
4. Fit the Retaining Spring behind the Pressed-On Ring.
5. Ensure the Hose cannot be pulled from its Connector.
Note
The Pressed-On Rings cannot be replaced as a separate
component. Should replacement be necessary the hose (as an
assembly) must be replaced.
87