CVA610 Coffee System
Displayed Message
STANDBY...
WATER SYSTEM FAULT
FILL WATER TANK
EMPTY WATERTANK
WARMING UP...
Table 5-4: Displayed messages (continued from table 5-3)
Information
The appliance is in the energy saving
•
Press ENTER
The level switch has been actuated by
water being present in the base of
the appliance
•
Clear unit of water from lower pan and
locate / repair source of leak.
•
Check level switch for proper operation
The water tank level switch is not actuated
– water tank float is below the switch level
•
Refill the water tank
•
Check that float and switch operate
•
Check that flowmeter is plugged into
the correct position of the electronic
Appliance is warming up, as warming up
the ". . ." in the display disappear
93
Technical Information