Water Level Switch - Miele CVA610 Technical Information

Technical Information
4.9

Water Level Switch

The Water Level Switch is located within the housing, in the area
behind the Water Tank Cavity (as shown in figure 4-10).
Figure 4-10: Water Level Switch
The Actuating Magnet for the Water Level Switch is located within
the float. The float is then installed into the Water Tank (as shown
in figure 11, item 1).
Figure 4-11: Water Level Switch Float
With the Water Tank installed and containing at least 900-1000
milliliters of water, the Water Level Switch contacts are closed.
When the water level drops below the minimum quantity, the Water
Level Switch contacts open. At this time the quantity incoming
water is monitored by the Electronic (via the flowmeter). Once 800
milliliters of water is measured, the "Fill Water Tank" message is
displayed.
24
CVA610 Coffee System