Ground Coffee - Dispensing - Miele CVA610 Technical Information

Technical Information
4.12

Ground Coffee - Dispensing

Refer to figure 4-15.
By adjusting the Dispenser Lever (item 1), the position of the
Dispensing Switch (item 2) is modified. The change results in
change to the volume of the dispenser container; hence the
quantity of ground coffee changes. Each position along the setting
alters the coffee quantity by about 0.5 grams.
The grinder fills the dispenser container with ground coffee. When
the dispenser container is full, the Dispenser Switch is activates
and the grinder motor is switched off.
1 Dispenser Lever
2 Dispensing Switch (1S13)
3 Catch - Switch - Dispensing
4 Catch - Coil - Dispensing
5 Coil - Dispensing (1L1)
6 Spring
7 Actuator
8 Bolt
9 Dispenser Flap
10 Wiper
Figure 4-15: Coffee Dispensing Components
28
CVA610 Coffee System