Weld Output Terminals And Selecting Cable Sizes - Miller Electric XMT 304 CC/CV Owner's Manual

4-5. Weld Output Terminals And Selecting Cable Sizes

!
ARC WELDING can cause Electromagnetic Interference.
To reduce possible interference, keep weld cables as short as possible, close together, and down low, such as on the floor.
Locate welding operation 100 meters from any sensitive electronic equipment. Be sure this welding machine is installed
and grounded according to this manual. If interference still occurs, the user must take extra measures such as moving
the welding machine, using shielded cables, using line filters, or shielding the work area.
Weld Output
Terminals
!
Turn off power before
connecting to weld out-
put terminals.
!
Do not use worn, dam-
aged, undersized, or
poorly spliced cables.
+
−
Output Receptacles Output Receptacles
This chart is a general guideline and may not suit all applications. If cable overheats, use next size larger cable.
*
**Weld cable size (AWG) is based on either a 4 volts or less drop or a current density of at least 300 circular mils per ampere.
2
( ) = mm for metric use
***For distances longer than those shown in this guide, call a factory applications representative at 920-735-4505.
OM-233 045 Page 18
Weld Cable Size** and Total Cable (Copper) Length in Weld Circuit
100 ft (30 m) or Less
100 4 (20) 4 (20)
150 3 (30) 3 (30)
200 3 (30) 2 (35)
250 2 (35) 1 (50)
300 1 (50) 1/0 (60)
350 1/0 (60) 2/0 (70)
400 1/0 (60) 2/0 (70)
500 2/0 (70) 3/0 (95)
600 3/0 (95) 4/0 (120)
Not Exceeding***
150 ft 200 ft 250 ft
(45 m) (60 m) (70 m)
4 (20) 3 (30) 2 (35)
2 (35) 1 (50) 1/0 (60)
1 (50) 1/0 (60) 2/0 (70)
1/0 (60) 2/0 (70) 3/0 (95)
2/0 (70) 3/0 (95) 4/0 (120)
2 ea. 2/0
3/0 (95) 4/0 (120)
(2x70)
2 ea. 2/0
3/0 (95) 4/0 (120)
(2x70)
2 ea. 2/0 2 ea. 3/0
4/0 (120)
(2x70) (2x95)
2 ea. 2/0 2 ea. 3/0 2 ea. 4/0
(2x70) (2x95) (2x120)
300 ft 350 ft 400 ft
(90 m) (105 m) (120 m)
1 (50) 1/0 (60) 1/0 (60)
2/0 (70) 3/0 (95) 3/0 (95)
3/0 (95) 4/0 (120) 4/0 (120)
2 ea. 2/0 2 ea. 2/0
4/0 (120)
(2x70) (2x70)
2 ea. 2/0 2 ea. 3/0 2 ea. 3/0
(2x70) (2x95) (2x95)
2 ea. 3/0 2 ea. 3/0 2 ea. 4/0
(2x95) (2x95) (2x120)
2 ea. 3/0 2 ea. 4/0 2 ea. 4/0
(2x95) (2x120) (2x120)
2 ea. 4/0 3 ea. 3/0 3 ea. 3/0
(2x120) (3x95) (3x95)
3 ea. 3/0 3 ea. 4/0 3 ea. 4/0
(3x95) (3x120) (3x120)
S-0007-F−