Remote 14 Receptacle Information; 110 Volt Ac Duplex Receptacle - Miller Electric XMT 304 CC/CV Owner's Manual

4-6. Remote 14 Receptacle Information

A J
K
I I
B B
C L N
H
C
M
D G
F
E
*The remaining sockets are not used.

4-7. 110 Volt AC Duplex Receptacle

24 VOLTS AC 24 VOLTS AC
115 VOLTS AC 115 VOLTS AC
REMOTE REMOTE
OUTPUT
CONTROL CONTROL
A/V A/V
AMPERAGE
VOLTAGE VOLTAGE
ST-801 192
GND GND
1
Socket* Socket Information
A 24 volts ac. Protected by circuit breaker CB2.
B Contact closure to A completes 24 volts ac con-
tactor control circuit.
I 115 volts ac. Protected by circuit breaker CB1.
J Contact closure to I completes 115 volts ac con-
tactor control circuit.
C Output to remote control; 0 to +10 volts dc, +10
volts dc in MIG mode.
D Remote control circuit common.
E 0 to +10 volts dc input command signal from re-
mote control.
H Voltage feedback; +1 volt dc per 10 output recep-
tacle volts.
F Current feedback; +1 volt dc per 100 amperes.
M CC/CV select
G Circuit common for 24 and 115 volts ac circuits.
K Chassis common.
1 110 V 7 A AC Receptacle
Power is shared between duplex
receptacle and Remote 14 recep-
tacle (see Section 4-6).
2 Circuit Breaker CB1
3 Circuit Breaker CB2
CB1 protects 110 volt ac portion of
duplex receptacle and Remote 14
receptacle from overload.
CB2 protects 24 volt ac portion of
Remote
overload.
Press button to reset breaker.
2 3
14 receptacle from
Ref. ST-801 245-A
OM-233 045 Page 19