Mode Switch Settings - Miller Electric XMT 304 CC/CV Owner's Manual

5-3. Mode Switch Settings

.
The SMAW modes provide the Adaptive Hot Start feature, which automatically increases the output amperage at the start of a weld should the
start require it. This eliminates electrode sticking at arc start.
Mode
Scratch Start TIG (GTAW)
Lift-Arc Trigger
Hold TIG (GTAW)
TIG (GTAW) With
HF Unit,
Pulsing Device,
Or Remote Control
MIG (GMAW)
Pulsed MIG
(GMAW-P)
(Requires an
pulsing device.)
Control SMAW
Panel Control
SMAW
Voltage-Sensing
Wirefeeder
OM-233 045 Page 24
external
Remote
Output Control
Select: or
Weld
Select: or
Requires:
Select: or
Requires:
Select: or
Requires: Feeder
Select: Volt
Requires:
Select: or
Requires:
Select: or
Weld
Select: or
Requires: Feeder
Amp
Amp
Control
Amp
Control
Volt
Feeder or Control
Amp
Control
Amp
Volt