Table of Contents
Advertisement
SMA Solar Technology AG
9.6 Resetting the Sunny Home Manager
The reset button is located in a small aperture on the bottom of the Sunny Home Manager.
Depending on how long you hold down the reset button, the Sunny Home Manager is partially or
completely reset.
Duration
1 to 5 seconds
5 to 10 seconds
Procedure
• Press the reset button with a sharp object (e.g.
paper clip) and hold until the desired reset result
has been achieved:
• To reset the network settings of the
Sunny Home Manager, press the reset button
until the status LED and the energy consumption
LED are intermittently flashing orange.
• To completely reset the Sunny Home Manager,
press the reset button until the status LED and
the energy consumption LED are intermittently
flashing red.
Installation Manual
Result
☑ The network settings of the
Sunny Home Manager are
reset.
The Sunny Home Manager is
completely reset:
☑ All settings of the Sunny Home
Manager are deleted.
☑ All cached PV system data
(energy values, events, etc.) are
deleted.
☑ The Sunny Home Manager
redetects the BLUETOOTH
devices located within range.
☑ The Sunny Home Manager must
be re-registered in Sunny Portal
(see Section 9.7, page 64).
Status of the status LED and the
energy consumption LED
Flashing orange intermittently
Flashing red intermittently
HoMan-IA-en-17
9 Troubleshooting
63
Advertisement
Table of Contents
