Setting The Operating Mode Of The Sma Radio-Controlled Socket - SMA HM-BT-10 Installation Manual

8 Commissioning
8.3 Setting the Operating Mode of the SMA Radio-Controlled
Socket
You can configure the operating mode of the SMA radio-controlled socket via the touch key on the
SMA radio-controlled socket or via Sunny Portal (see user manual "SUNNY HOME MANAGER in
Sunny Portal").
Operating mode
Automatic
Manually switched on
Manually switched off The SMA radio-controlled socket is switched off. The connected load
Requirements:
☐ The SMA radio-controlled socket must be inserted in an outlet.
☐ The upper horizontal LED must be glowing orange or green.
Procedure
1.
Requirement for "Automatic" mode
You can only set Automatic mode if you have configured the SMA radio-controlled
socket for the connected load in Sunny Portal.
• If the SMA radio-controlled socket was not registered together with the
Sunny Home Manager in Sunny Portal, add the SMA radio-controlled socket to the
system as a new device (see user manual "SUNNY HOME MANAGER in
Sunny Portal").
50 HoMan-IA-en-17
Explanation
The SMA radio-controlled socket is controlled by the
Sunny Home Manager. Depending on the current control command of the
Sunny Home Manager, the SMA radio-controlled socket is either
switched on or off in this mode.
• On: The connected load can draw electric current.
• Off: The connected load cannot draw electric current.
The SMA radio-controlled socket is switched on. The connected load can
draw electric current.
The SMA radio-controlled socket is not controlled by the
Sunny Home Manager.
cannot draw electric current.
The SMA radio-controlled socket is not controlled by the
Sunny Home Manager.
SMA Solar Technology AG
Installation Manual