Viessmann VITODENs 200 Installation Instructions Manual page 87

Scanning operating conditions and sensors
Constant temperature control unit
1. Press c.
2. Select the required operating con-
dition scan with a or b.
Operating condition display (sub-
ject to system equipment level)
1
15 °C/°F
3
65 °C/°F
5
50 °C/°F
5□
45 °C/°F
6
70 °C/°F
263572
* 2
h
* 2
030529
001417 h
002850
*1
Display in °F if the relevant code has been selected and with the fourth display digit.
*2
Reset hours run and burner starts after maintenance has been completed. You can reset
the hours run to 0 by pressing e.
Description
Outside temperature sensor - actual
* 1
value (i: only if an outside tempera-
ture sensor is connected)
Boiler temperature sensor - actual value
* 1
Cylinder temperature sensor - actual
* 1
value
Solar - actual DHW temperature
* 1
Actual value - collector sensor
* 1
Burner hours run
Burner starts
Hours run - solar circuit pump
Solar energy in kW/h
(cont.)
3. Press c.
Service scans
71