Sensitivity Control - Miller Electric Digital Elitet Owner's Manual

3-5. Sensitivity Control

Stick Electrode
Short Circuiting (MIG)
Pulsed & Spray (MIG)
Gas Tungsten Arc (TIG)
Plasma Arc Cutting/Welding
Grinding
Recommended Sensitivity Settings
1 Sensitivity Control Buttons
Use Sensitivity Control Low and Hi buttons
to make the lens more responsive to differ-
ent light levels in various welding pro-
cesses. Use a sensitivity setting of 5 for
most applications.
The sensitivity ranges for each mode are as
follows:
Weld, Cutting, X Modes − 0 − 10
Grind Mode − No sensitivity adjustment
It may be necessary to adjust helmet sensi-
tivity to accommodate different lighting con-
ditions or if lens is flashing On and Off. Ad-
just helmet sensitivity as follows:
.
1
Adjust helmet sensitivity in lighting con-
ditions helmet will be used in.
S
Press Sensitivity Low button to lower
setting to 0.
S
Face the helmet in the direction of use,
exposing it to the surrounding light con-
ditions.
S
Press Sensitivity Hi button repeatedly
until the lens darkens, then press Low
button until lens clears. Helmet is ready
for use. Slight readjustment may be
necessary for certain applications or if
lens is flashing on and off.
Mid-Range
Low/Mid-Range
Mid-Range
Mid/High-Range
Low/Mid-Range
No sensitivity setting; use Grind mode
805 010
OM-234 388 Page 7