Section 6 − Replacing The Battery - Miller Electric Digital Elitet Owner's Manual

SECTION 6 − REPLACING THE BATTERY
+
Be sure Positive
(+) side of battery
faces up.
OM-234 388 Page 12
1
+
To replace the batteries, re-
move the auto-darkening lens
assembly (see Section 5).
1 Battery Tray
After removing the lens as-
sembly, slide the battery hold-
ing trays out and remove the
old batteries.
Replace with CR2450 lithium
type batteries (2 required) or
equivalent (Miller Part No.
217043).
.
Be sure Positive (+) side
of the battery faces up (to-
ward inside of helmet).
Reinstall the battery trays. To
test, press the On button. The
display screen should turn on.
Reinstall the lens assembly.
.
Left and right battery trays
are not interchangeable.
The auto−darkening hel-
met will not work if battery
trays are installed on the
wrong sides.
805 010