Lens Delay Control - Miller Electric Digital Elitet Owner's Manual

3-6. Lens Delay Control

OM-234 388 Page 8
1 Lens Delay Control
Use the Lens Delay Control Fast
and Slow buttons to adjust the time
for the lens to switch to the clear
state after welding or cutting.
The delay is particularly useful in
eliminating bright after-rays pres-
ent in higher amperage applica-
tions where the molten puddle re-
mains bright momentarily after
welding. Use the Lens Delay Con-
trol buttons to adjust delay from 0 to
10 (0.1 to 1.0 second).
.
There is no lens delay adjust-
ment in the Grind mode.
1
805 010