Section 7 − Installing Optional Magnifying Lens; Section 8 − Maintenance - Miller Electric Digital Elitet Owner's Manual

SECTION 7 − INSTALLING OPTIONAL MAGNIFYING LENS
NOTICE − Never use solvents or abrasive cleaning detergents.
NOTICE − Do not immerse the lens assembly in water.
The helmet requires little maintenance. However, for best performance clean
after each use. Using a soft cloth dampened with a mild soap and water solution,
wipe the cover lenses clean. Allow to air dry. Occasionally, the filter lens and
sensors should be cleaned by gently wiping with a soft, dry cloth.
1
SECTION 8 − MAINTENANCE
1 Optional Magnifying Lens
Starting at the top, slide magnifying
lens into the helmet retaining brack-
ets. Align the magnifying lens with
the auto-darkening lens assembly.
Reverse procedure to remove
magnifying lens.
.
To prevent lens fogging, install
flat side of magnifying lens to-
ward auto-darkening lens.
OM-234 388 Page 13
805 011