Figure 11 Attaching Mounting Brackets To The Chassis - ZyXEL Communications ms-7206 User Manual

Figure 11 Attaching Mounting Brackets to the Chassis

4 Position a mounting bracket (that is already attached to the chassis) on one side of the
rack, lining up the screw holes on the bracket with the screw holes on the side of the
rack.
5 Use the screwdriver to install the screws through the mounting bracket holes into the
rack.
6 Repeat steps
MS-7206 Hardware Installation Guide
4-5 to attach the second mounting bracket on the other side of the rack.
Chapter 6 Chassis Installation
49