Wireless Setup - D-Link DCS-5220 User Manual

Section 3 - Configuration
SSID:
(Service Set Identifier) is a name that identifies a wireless
network. Access Points and wireless clients attempting to
connect to a specific WLAN (Wireless Local Area Network)
must use the same SSID. The default setting is default.
Wireless Mode:
Click on the drop-down list and select from the following options:
Infrastructure - connecting the WLAN using an Access Point
such as the DWL-2100AP or a DIR-655 wireless router.
Ad-Hoc – wireless mode used when connecting directly to
a computer equipped with a wireless Adapter in a peer-to-
peer environment.
Channel:
In Infrastructure mode, the wireless channel is automatically
selected by the camera. In Ad-Hoc mode, the default wireless
channel setting is channel 6. Select the channel that is the
same as the other wireless devices on your network.
TX Rate:
Select the transmission rate on the network. Auto is the
default setting.
Security:
Select the encryption type from the drop-down list. The default
setting for encryption is None, which means the security
is disabled.
D-Link DCS-5220 User Manual

Wireless Setup

43