Wireless Setup - D-Link DCS-931L User Manual

Section 3 - Configuration
This section allows you to set up and configure the wireless settings on your camera.
Enable
Check this box to allow your camera to connect to your network wirelessly.
Wireless:
SSID:
Enter the network name(SSID) of the wireless network you want to connect
to. You can also click the Site Survey button below to choose an available
network and fill in settings automatically.
Channel: If you are using Ad-Hoc as your connection mode, select the same channel
that is being used by yourwireless network.
Connection
Select the connection mode used by your wireless network. In most cases,
Mode: you should select Infrastructure. Ad-Hoc is only used if your camera is
directly connecting to another PC or device.
Site Survey:
Clicking this button will allow you to select an available wireless network
to connect to, and will fill in the necessary settings for you.
Wireless
Select the wireless security mode used by your wireless network. If you
Security Mode:
select WEP or WPA-PSK/WPA2-PSK, enter the password for your wireless
network in the text box that appears.
D-Link DCS-931L User Manual

Wireless Setup

25 25