Wireless Setup - D-Link DCS-5029L User Manual

Section 4 - Configuration
This section allows you to set up and configure the wireless settings on your camera.
Enable
Check the box to allow your camera to connect to your network
Wireless:
wirelessly.
Site Survey: Click Rescan to scan for an available wireless network. Then click the
drop-down menu to select a wireless network.
SSID:
Displays the SSID (network name) of the wireless network you want
to connect to.
Wireless Mode:
Select the connection mode used by your wireless network. In most
cases, you should select Infrastructure. Ad-Hoc is only used if your
camera is directly connecting to another PC or device without the use
of a router or access point.
Channel: If you are using Ad-Hoc mode, select the same channel that is being
used by your wireless network, or select Auto.
Authentication:
Select the wireless security mode used by your wireless network.
Encryption: If you select WPA-PSK or WPA2-PSK for your authentication type, you
must specify what type of encryption your wireless network uses.
Key: If you select WPA-PSK or WPA2-PSK for your authentication type,
enter the Key (also known as password) for your wireless network.
Click Save Settings.
D-Link DCS-5029L User Manual

Wireless Setup

39 39